EasyManuals Logo

Alesis Transactive Wireless 2 User Manual

Alesis Transactive Wireless 2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
User Guide (English)
Introduction
Box Contents
TransActive Wireless 2
Microphone
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product
(system requirements, compatibility information,
etc.) and product registration, visit alesis.com.
For additional product support, visit
alesis.com/support.
Stand-Mounting
Always install loudspeakers in accordance with applicable electrical and building codes.
Install the loudspeaker according to its maximum weight. Check the specifications of your stand
or pole to ensure it can support the loudspeaker’s weight. Also, observe all safety precautions
specified by the manufacturer.
Do not mount multiple loudspeakers on the same stand or pole.
Always verify that the stand or pole is on a flat, level, and stable surface. Also, fully extend the
legs of tripod-style stands, and ensure its legs do not present a trip hazard.
Inspect the stand (or pole and associated hardware) before each use and do not use equipment
with worn, damaged, or missing parts.
Always be cautious in windy, outdoor conditions. You may need to place additional weight (e.g.,
sandbags) on stand’s base to improve stability. Do not attach banners or similar items to any
part of a loudspeaker system. Such attachments could act as a sail and topple the system.
Unless you are confident that you can handle the loudspeaker’s weight, ask another person to
help you lift it onto the stand or pole.
Make sure your cables are out of the way of performers, production crew, and audience so they
will not trip over them, pulling the loudspeaker off the stand or pole.
Rechargeable Batteries
Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery,
how you use this battery has a significant impact on its lifespan. With proper use and treatment, a
lead-acid battery can last for years. Here are some recommendations for getting the longest life from
the internal battery.
General Usage
Fully charge the battery before using it.
Charge the battery completely after each use.
Storage
For best product longevity, do not store at exceedingly hot (greater than 90°F /
32°C) or exceedingly cold (less than 32°F / 0°C) temperatures.
It is acceptable to leave your sound system plugged in. This will not overcharge
the battery.
If you leave the battery level low and do not charge it for 6 months, it may
permanently lose capacity.
Repair If the battery fails to charge, contact Alesis at alesis.com.
Disposal
Bring the unit to a recycling center or dispose of in accordance with local
ordinances.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alesis Transactive Wireless 2 and is the answer not in the manual?

Alesis Transactive Wireless 2 Specifications

General IconGeneral
Speaker type2-way
Speaker placementFloor
Built-in amplifierYes
Control typeRotary
Product colorBlack
AUX in ports1
RMS rated power25 W
Peak Music Power Output (PMPO)50 W
Battery voltage5 V
Battery capacity2.1 Ah
Power source typeBattery
Battery life (max)50 h
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth267 mm
Width375 mm
Height442 mm
Weight11200 g
Driver diameter203.2 mm
Woofer diameter (imperial)8 \
Tweeter diameter (imperial)1 \

Related product manuals