3
Quick Start
1. Make sure all items listed in Introduction > Box Contents are included in the box.
2. Read safety instruction booklet before using the product.
3. Make sure that you have completely charged the battery prior to first use for maximum
battery life.
4. Study this setup diagram.
5. Make sure all input devices such as microphones, CD players, or MP3 players are turned
off and volume settings are set at “zero.”
6. Connect all devices as shown.
7. Switch everything on in the following order:
• audio input sources (i.e. microphones, instruments, CD/MP3 Players)
• TransActive Wireless 2
8. When turning off, always reverse this operation:
• TransActive Wireless 2
• last, any input devices
Connection Diagram
Items not listed in
Introduction > Box Contents are sold separately.
Smartphone,
tablet, etc.
Microphone
Guitar
Power
Rear Panel Front Panel