Need help?Do you have a question about the Alesis M1 ACTIVE and is the answer not in the manual?
General| Tweeter | 1" silk dome |
|---|---|
| Crossover Frequency | 2.8 kHz |
| Type | Active Studio Monitor |
| Inputs | XLR, 1/4" |
| Input Impedance | 10k ohms |
| Polarity | Positive signal at + input produces outward woofer cone displacement |
| Protection | RF interference, output current limiting, over-temperature, turn-on/off transient, subsonic filter |
| Indicator | Power LED |
| Power Requirements | 100V-240V, 50/60Hz |
Strategies to minimize acoustic reflections from surfaces and console for optimal monitoring.
Recommendations for placing M1 Actives for optimal stereo imaging and soundstage.
Guidance on positioning M1 Actives horizontally for balanced stereo imaging and visibility.
Advice on vertical placement to simulate consumer listening environments and expand soundstage.
Techniques for plugging ports to tailor low-frequency response based on room placement.
Instructions for connecting M1 Actives, including power, grounding, and input types.
Details on connecting various line-level sources using XLR and 1/4" jacks.
Guide to setting the input level for optimal listening levels and system dynamic range.
Table to diagnose and solve common problems with M1 Active/Surround systems.
Guidance on when and how to seek professional servicing for M1 Active units.
To Next Page
