To Next PageTo Next Page
Need help?Do you have a question about the ALIBI ALI-QVR4116H and is the answer not in the manual?
Guide to the initial setup wizard for recorder configuration and video recording.
Basic adjustments for analog cameras: OSD, image settings, motion, privacy mask.
Configuring motion detection to sense motion in specific areas of the video image.
Managing internal and network HDDs, including initialization and storage modes.
Steps to configure the HDD, including installation and initialization.
Setting up system-related alarms like HDD full, network disconnect, illegal login.
Detects objects crossing a virtual line in specified directions and durations.
Detects objects entering a virtual quadrangle in the video image.
Detects people, vehicles, or objects entering a pre-defined virtual region.
Detects people, vehicles, or objects exiting a pre-defined virtual region.
Quickly analyze VCA data from video images using search features.
Toolbar for quick access to common camera functions like recording, zoom, and PTZ.
Setting up camera recording parameters for continuous and event recording.
Configuring main and sub-stream recording parameters like resolution and bitrate.
Setting up automatic start and stop times for recording based on a schedule.
Configuring motion detection to trigger recording in specific video areas.
Reviewing recorded video files through various playback methods.
Detailed playback of recorded video by selecting a specific channel and date.
Searching and playing back video triggered by specific event types like motion or alarms.
Bypassing unimportant video information by playing motion/VCA events at normal speed.
Exporting video clips and system data to external storage devices.
Exporting specific video clips based on search criteria.
Searching and exporting video recordings triggered by events like motion detection.
Configuring RS-485 communication parameters for PTZ cameras.
Accessing PTZ features via a control panel, with pre-configured options.
Configuring camera positions (presets), automated movements (patrols, patterns).
Setting specific camera locations (presets) for event-triggered pointing.
Setting camera movements between KeyPoints (presets) with duration and speed.
Recording and replaying camera movement sequences (patterns).
Steps to create new user accounts with specific permissions and roles.
Modifying existing user account details, permissions, and passwords.
Setting up IP addresses, subnet masks, and DNS for network connectivity.
Setting up Dynamic DNS for accessing the QVR from outside the local network.
Procedure to initialize HDDs before they can be used for data storage.
Adding NAS or IP SAN devices to the QVR for extended storage.
Allocating HDD space via Partition or Group modes for camera recordings.
Updating the QVR firmware via USB, Alibi Connect, or FTP server.
Procedure for logging into the QVR from a remote computer.
Accessing and modifying QVR configuration settings remotely.
General