Name: Alienware 15 R3
Brand: Alienware
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Removing the power-button board

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your computer.

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.

2 Remove the wireless card.

3 Follow the procedure from step 1 to step 3 in "Removing the hard drive".

4 Remove the solid-state drive.

5 Remove the rear-I/O cover.

6 Remove the computer base.

7 Remove the battery.

8 Remove the memory modules.

9 Follow the procedure from step 1 to step 17 in “Removing the system board”.

Procedure

1 Remove the two screws (M2x3) that secure the power-button board to the

palm-rest assembly.

Other manuals for Alienware 15 R3

Questions and Answers:

Need help?

Do you have a question about the Alienware 15 R3 and is the answer not in the manual?

General