Alienware 17 R5 - Alienware Graphics Amplifier Connection

7 Connect the XBOX controller to the USB Type-A port on the USB dongle.
8 Connect the Oculus Rift tracker for Touch to the USB Type-A port on the
dongle.
9 Follow the on-screen instructions to complete the setup.
Alienware Graphics Amplier
Alienware Graphics Amplier enables you to connect an external graphics card to
your computer.
When using the Virtual Reality (VR) headset, connect the HDMI cable to the
graphics card installed on your Alienware Graphics Amplier. The USB cables
from the VR headset can be connected either to your computer or your Alienware
Graphics Amplier.
NOTE: The USB dongle is not required, if you are connecting the USB 3.1
Gen 1 cables on your VR headset to the USB 3.1 Gen 1 Type-A port on
your Alienware Graphics Amplier.
10