Ŷ chapter 2 bios setup and security feature
passwords, the Supervisor password must be set first.
The passwords activate two different levels of protection:
1. The system always asks for a password every time it is powered
on.
2. The system asks for a password only when you attempt to enter
the BIOS utility.
The passwords are encrypted and stored in NVRAM. Make sure you
write them down or memorize them. If you lost the passwords, the
computer may need to be sent back to the factory or to an authorized
service dealer to reset the passwords.
Power Setup
Item Selections /
Sub-menu
Description
Power Button
Mode
On/Off
Suspend
[On/Off]: When the power button is
pressed, the system is turned off.
[Suspend]: When the power button is
pressed, the system enters the suspend
mode.
High
Performance
Mode
Enable
Disable
When enabled, maximum system
performance can be achieved. The
processor performance is enhanced.
Long Battery
Life Mode
Enable
Disable
When enabled, maximum battery life can
be achieved. The processor performance
is lowered.
Note:
The suspend mode selection in BIOS only applies to older Windows versions
2-6
To Next Page
Loading...
