Ŷ appendix B agency regulatory notices
B-5
FIMKO (Finland)
DEMKO (Denmark)
NEMKO (Norway)
SETI (Finland)
EANSW (Australia)
SEV (Switzerland)
IMQ (Italy)
UTE (France)
CCC (China)
PSB (Singapore)
PSE (Japan)
BSMI (Taiwan)
B (Polish)
VDE (Germany)
SASO (Saudi Arabia)
The flexible cord must be of a HAR (harmonized) type HO5VV-F
3-conductor cord with a minimum conductor size of 0.03 square
inches.
The minimum specification for the flexible cord for Class II product are:
(1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
The cord set must have a current capacity of at least 10 A and a
nominal voltage rating of 125 / 250 VAC.
CAUTION: MODEL M-5500 SERIES IS DESIGNED TO USE WITH THE
FOLLOWING AC ADAPTER MODEL ONLY
Manufacturer: LITE-ON ELECTRONICS, INC
Model: PA-1900-05 (90W)
Manufacturer: LISHIN INTERNATIONAL ENTERPRISE CORP.
Model: LSE0202A2090 (90W)
Telephone lines requirement
The appropriate utilization of a 26AWG telephone line cord on the unit.
CAUTION: Always disconnect all telephone lines from the wall outlet before
servicing or disassembling this equipment.
CAUTION: To reduce the risk of fire, use only No. 26AWG or larger
telecommunication line cord.
Battery Pack Safety
The battery pack is intended to use only with this notebook.
To Next Page
Loading...
