Alienware Area-51m 766 - Exit Setup

■ chapter 2 bios setup and security feature
2-9
Note: The Suspend Mode selection in BIOS only applies to older Windows version
(such as Windows 3.1 or Windows 95 or NT4) or non-Windows operating system. In
Windows ME / 98SE / 2000 / XP, suspend mode and settings are determined by
settings in the Power Options Properties (Start > Control Panel > Power Options).
Exit Setup
Item
Selections /
Sub-menu
Description
Saves
Changes and
Exit
N/A
After you have completed the BIOS
settings, select this item to save all
settings, exit BIOS Setup utility, and
reboot. New system settings will take
effect on next power-up.
Discard
Changes and
Exit
N/A
Select this item if you intend to exit the
BIOS Setup utility without making any
changes to the current settings.
Discard
Changes
N/A
Discards changes done so far to any of
the setup questions.
Load Optimal
Defaults
N/A
Load Optimal Default value for all the
setup questions. F9 key can be used for
this operation.