CD-ROM, DVD-ROM, CD-RW, or Combo Drive
Problems
The CD-ROM, DVD-ROM, or Combo drive does not work -
n Try rebooting the system.
n The disk is damaged or files are not readable.
n After you have inserted a CD-ROM disk, it may take a
moment before you can access its content.
The drive dose not read any disks -
n The CD may not be properly seated in the tray. Make
sure the disk is firmly seated onto the spindle.
n The disk is damaged or not readable.
The disk cannot be ejected -
n Normally, it takes a few seconds to eject the disk.
n If the disk cannot be ejected, it may be mechanically
jammed. Straighten out a paper clip and insert it to a tiny hole
next to the eject button. This should reject the disk tray. If not,
return the unit for repair. Do not forcefully pull on the disk tray.
The CD-RW drive (optional device) cannot record -
n You need to purchase and install a burner utility program
to record files to a blank media.
To Next Page
Loading...
