Identifier GUID-98068FC2-1C1C-46DE-B3FA-DF9D488E9BA1
Status Translated
Rimozione del coperchio della base
AVVERTENZA: Prima di eettuare interventi sui componenti interni del computer, leggere le informazioni sulla
sicurezza fornite con il computer e seguire la procedura in Prima degli interventi sui componenti interni del
computer. Dopo gli interventi sui componenti interni del computer, seguire le istruzioni descritte in Dopo gli
interventi sui componenti interni del computer. Per maggiori informazioni sulle procedure consigliate relative alla
sicurezza, consultare la home page Conformità alle normative su www.dell.com/regulatory_compliance.
Identifier GUID-26F7AB53-3869-45D1-905B-B17BBE597FA9
Status In Translation
Procedure
1 Loose the six captive screws that secure the base cover to the computer base.
2 Starting from the middle of the bottom side, pry open the base cover with a plastic scribe.
3 Slide the base cover o the computer base.
4 Disconnect the battery cable from the system board.
5 Press and hold the power button for ve seconds to ground the system board.
16