Table 4. System setup options—Advanced menu (continued)
Advanced
Auto Power On Time Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Default: 12:30:30
Numlock Key Allows you to set the status of the Num Lock key during boot to
On or Off.
Default: Enabled
Performance Options
CPU TCC offset Allows you to configure the maximum CPU temperature within a
certain range of values.
Overclocking Feature Allows you to enable or disable the Overclocking Feature.
Default: Disabled
Maintenance
Data Wipe on next boot When enabled, the BIOS will schedule a data wipe cycle for all
storage devices that are connected to the system board on the
next reboot.
Default: Disabled
BIOS Recovery from Hard Drive Enables the computer to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive or
an external USB key.
NOTE: BIOS Recovery from Hard Drive is not available for
Self-encrypting drives (SED).
Default: Enabled
BIOS Auto-Recovery When enabled, the autorecovery will be performed if BIOS
image integrity check fails and there is a a recovery image on
the hard drive.
NOTE: BIOS Auto-Recovery is not possible from other
media.
Default: Disabled
SupportAssist System Resolution Controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery tool.
Auto OS Recovery Threshold Allows you to configure the Auto OS Recovery Threshold.
Default: 2
SupportAssist OS Recovery Allows you to enable or disable the SupportAssist OS Recovery.
Default: Enabled
Table 5. System setup options—Security menu
Security
Unlock Setup Status Displays the unlock setup status.
Admin Password Status Displays whether the admin password is set.
Default: Not Set
System Password Status Displays whether the system password is set.
Default: Not Set
HDD Password Status Displays if the hard drive password is set.
89
To Next Page