10 | About your monitor
Back view
Back view without monitor stand
Back view with monitor stand
Label Description Use
1 Joystick Use it to control the OSD menu.
2 Function buttons For more information, see Operating
the monitor.
3 Barcode, serial number, and
Ser
vice Tag label
Refer to this label if you need to
contact Dell for technical support.
4 Cable-management clip To organize the cables neatly.
5 Stand release button Releases stand from the monitor.
6 VESA mounting holes (100 mm
x
100 mm - behind VESA
Cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
To Next Page
Loading...
