About your monitor | 11
Back view
Label Description Use
1 VESA mounting holes
(10
0 mm x 100 mm - behind
VESA Cover)
Wall mount the monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
2 Stand release button Releases the stand from the monitor.
3 Regulatory label Lists the regulatory approvals.
4 Cable-management slot (at
the back of
the stand)
To organize cables by routing them
through this slot.
5 Headphone hanger Push to release the headphone hanger
t
o hang a headset.
NOTE: The maximum bearing
capacity
of the headphone
hanger is 500 g.
Back view with monitor stand
To Next Page
Loading...
