58 | Operating the monitor
OSD warning message
When the monitor does not support a particular resolution mode, you will see the
fol
lowing message:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the horizontal and vertical
frequency ranges addressable by this monit
or. The recommended resolution is
1920 x 1080.
NOTE: The message may be slightly different according to the connected
input signal.
You will see the following message before the DDC/CI func
tion is disabled:
When you adjust the Brightness level
above the default level for the first time,
the following message appears:
NOTE: If you select Yes, the message will not appear the next time you
changes the Brightness setting.
To Next Page
Loading...
