12 | About your monitor
Rear and bottom view
Rear and bottom view without monitor stand
Label Description Use
1 Power connector Connect the power cable (shipped with
your monitor).
2 SuperSpeed USB
5 Gbps (USB 3.2 Gen 1)
T
ype-B upstream port
Connect the USB cable (shipped with
your
monitor) to this port and your
computer to enable the USB ports on your
monitor.
3 SuperSpeed USB
5 Gbps (USB 3.2 Gen 1)
Type-A downstream
p
orts (3)
Connect your USB 3.2 Gen 1 (5 Gbps)
devic
e.
NOTE: To use these ports, you must
connect the USB cable (shipped with
your monitor) to the USB-upstream
port on the monitor and to your
computer.
NOTE: To avoid signal interference,
when a wireless USB device is
connected to a USB downstream
port, it is not recommended to
connect any other USB devices to
the adjacent port.
To Next Page
Loading...
