49
Operating the monitor
Icon Menu and submenu Description
INPUT SOURCE Use the INPUT SOURCE menu to select between the different video signals that may be
connected to your monitor.
Figure 45. INPUT SOURCE menu
DP Select the DP input when you are using the DisplayPort (DP) connector. Press the joystick
button to confirm the selection.
HDMI 1 Select the HDMI 1 or HDMI 2 input when you are using the HDMI connector. Press the
joystick button to confirm the selection.
HDMI 2
AUTO SELECT Automatically scans for available input sources. Press the joystick button to confirm the
selection.
OPTIONS FOR DP/
HDMI
Allows you to set this feature to:
• PROMPT FOR MULTIPLE INPUTS: Always displays the “Switch to DP/HDMI Video
Input” message for you to choose whether to switch or not.
• ALWAYS SWITCH: Always switches to DP/HDMI video input (without asking) when
the DisplayPort or HDMI cable is connected.
• OFF: Never automatically switches to DP/HDMI video input when the DisplayPort or
HDMI cable is connected.
Press the joystick button to confirm the selection.
NOTE: This feature is disabled when AUTO SELECT is set to OFF.
RESET INPUT
SOURCE
Resets all settings under the INPUT SOURCE menu to the factory defaults.
To Next Page
Loading...
