HOW TO INSTALL TRANSFOMER OF TR·1 (ONE OUTPUT)
TRANSFOMER OF TR-1 IS USED FOR 220V, 240V, 380V AND 415V THEN TRANSFER
TO 110V. ATTACHING POWER PILOT LAMP AND ONE OUTPUT OUTLET.
ASSEMBLING GUIDE:
1.Make sure the voltage of working environment.
2.Choose the exact input point and well fix up.
3.Make sure whole screws of transformer are well locked.
4.Setting transformer on stable and dry wall.
5.Collecting cable and wire on the wire box of working plrce.
6.Keep from accident caused, don't disassemble and refit locked parts or
wiring of transformer when assembly proceeding.
TRANSFOMER
POWER CORD
CIRCUIT
415V~
I
::1:
V
$
C\J
9
380V~
240
V
220V~
OV
PILOT LAMP
OUTLET
12
To Next Page
Loading...