EasyManua.ls Logo

Align T-REX 450SA ARF User Manual

Align T-REX 450SA ARF
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Specifications
Length: 25.6 in (650mm)
Height: 9.0 in (228mm)
Main Rotor Diameter: 27.6 in (700mm)
Tail Rotor Diameter: 5.9 in (150mm)
Flying Weight: 22–24 oz (620–680 g)
Main Drive Gear: 150T
Motor Pinion Gears: 11T/13T/15T
Main Gear Ratios: 13.6:1/11.5:1/10:1
Main Tail Drive Gear: 106T
Tail Drive Gear: 25T
Tail Gear Ratio: 4.2:1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Align T-REX 450SA ARF and is the answer not in the manual?

Align T-REX 450SA ARF Specifications

General IconGeneral
BrandAlign
ModelT-REX 450SA ARF
CategoryToy
LanguageEnglish

Summary

Specifications

Introduction

ARF Contents and Requirements

Required Electronic Components

Lists essential electronic components for the helicopter.

Recommended Equipment Setups

Radio Systems and Setups

Lists compatible radio systems and general setup advice.

Sport and Mild 3D Flying Setup

Details components for sport and mild 3D flying.

Precision and Aggressive 3D Flying Setup

Specifies components for precise and aggressive 3D maneuvers.

Assembly Tools and Materials

Important Safety and Liability Information

General Warnings and Li-Po Safety

Covers operation cautions and critical Li-Po battery guidelines.

Limited Warranty and Liability

Details product warranty coverage, limitations, and user liability.

Operational Safety and Support

Safety Precautions

Essential precautions for safe operation and handling of the model.

Assistance, Repairs, and Inspections

Procedures for obtaining support, repairs, and shipping products.

Repair Procedures and Additional Safety

Warranty and Non-Warranty Repairs

Details on receiving warranty service and costs for non-warranty repairs.

General Safety Precautions

Rules for safe operation, avoiding interference, and protecting components.

Core Assembly and Installation Procedures

Swashplate Servo Installation

Step-by-step guide to installing swashplate servos.

Tail Servo and Gyro Installation

Instructions for mounting the tail servo and gyro.

Receiver Installation and Connection

Guide for mounting and connecting the radio receiver.

Motor, ESC, and Transmitter Setup

Steps for motor installation, ESC connection, and transmitter configuration.

Control Linkage and Transmitter Adjustments

Instructions for control linkage assembly and fine-tuning transmitter settings.

Throttle and Pitch Curve Settings

Guide for setting throttle and pitch curves for flight modes.

Pre-Flight Preparations and Checks

Canopy and Battery Mounting

Installing the canopy and balancing the model's center of gravity.

Blade Balancing and Tracking

Procedures for balancing and tracking main rotor blades.

Before the First Flight Checklist

Final checks before the initial flight.

Maintenance and Parts Information

Recommended Maintenance

Routine maintenance tasks to keep the model in optimal condition.

Parts Listings and Exploded Views

Comprehensive lists and diagrams of model parts.

AMA National Model Aircraft Safety Code

Related product manuals