Need help?Do you have a question about the Align T-REX 600 CF and is the answer not in the manual?
General| Material | Carbon Fiber |
|---|---|
| Skill Level | Advanced |
| Power Source | Electric |
| Type | Helicopters |
| Main Rotor Diameter | 1350mm |
| Motor | Brushless |
| Battery | 6S LiPo |
Explains the meaning of warning and prohibition symbols used in the manual.
Provides crucial safety and operational guidelines for R/C helicopter use.
Lists essential radio equipment needed for assembly and operation.
Specifies the basic tools necessary for building the helicopter.
Advises on choosing safe, open areas for flying to prevent accidents.
Recommends seeking guidance from experienced pilots for safe operation.
Warns about the danger of high-speed rotating blades and precautions.
Emphasizes keeping the model away from moisture to prevent damage.
Advises storing the model away from heat to prevent deformation.
Stresses using the product correctly and as intended for safety.
Highlights operating within one's ability and avoiding fatigue.
Comprehensive checklist of critical inspections before each flight for safety.
Details the assembly of the main rotor holder with diagrams and part numbers.
Instructions for assembling the SF mixing arm, including required parts.
Step-by-step guide for assembling the tail boom case and related components.
Instructions for attaching the horizontal and vertical stabilizers.
Guide for installing the motor mount and securing the motor.
Illustrates the placement of key components like motor, receiver, gyro, and servos, including wiring diagrams.
Instructions for mounting the fiberglass canopy to the helicopter.
Details on setting linkage rod lengths for servos and control surfaces.
Guides on setting up servo connections and adjusting travel for different transmitters.
Procedures for setting the tail servo and pitch assembly to neutral.
How to check and set the gyro's head lock direction for proper response.
Throttle and pitch settings for general flying modes.
Throttle and pitch settings for 3D aerobatic flying.
Guidance on practicing basic flight controls and hovering maneuvers.
How to adjust rudder, elevator, and aileron trims for stable flight.
Common flight issues and solutions, including blade tracking adjustments.
Step-by-step guide for practicing flight maneuvers and circle flying.
Detailed list and diagrams of all parts, including optional components.
To Next Page