Align Trex 450 Plus User Manual

Legend for warning labels indicating potential hazards.

Key considerations and disclaimers for safe product usage.

Guidelines for choosing safe and legal flying fields.

Detailed safety instructions for handling Li-Po batteries.

Instructions to protect the model from water or moisture.

Advice on correct usage and avoiding misuse of the product.

Recommendation to seek guidance from experienced pilots for setup and flight.

Essential safety rules to follow during operation.

Warning about the danger of rotating blades and maintaining safe distance.

Instructions to protect the model from damage due to heat.

Detailed inspection checklist before flying the helicopter.

Overview of standard equipment and initial transmitter setup.

Diagrams showing various linkage rods and their dimensions.

Procedures for setting and adjusting servos for optimal performance.

Steps to set the neutral position for the tail servo and pitch assembly.

Information on compatible transmitters for the flybarless system.

How to select the H-1 swashplate type in the transmitter settings.

Diagram and values for configuring the transmitter for the helicopter.

Overview of the 3GX MRS flybarless system's features, indicators, and adjustment dials.

Diagram showing how to wire the 3GX MRS system and related components.

Procedures for initializing the 3GX MRS and entering setup mode.

How to set the correct direction for rudder gyro compensation.

Setting the maximum travel limits for the rudder.

Importance and method of practicing flight using a simulator.

Method for checking and adjusting the helicopter's center of gravity.

Step-by-step guide for practicing basic flight controls.

Main rotor balancing and flight control practice steps.

Adjusting gyro gain, forward flight, and roll rate for optimal performance.