Need help?Do you have a question about the Align Trex 500ESP and is the answer not in the manual?
General| Brand | Align |
|---|---|
| Model | Trex 500ESP |
| Main Rotor Diameter | 970 mm |
| Tail Rotor Diameter | 200 mm |
| Weight (Approximate) | 1700 g |
| Battery | 6S LiPo |
| Type | Helicopter |
| Motor | Brushless Motor |
Describes warning symbols used in the manual.
General safety and usage warnings for R/C helicopters.
Essential safety advice for flying.
Guidelines for choosing safe flying locations and environments.
Importance of experienced pilots and safe operation.
Lists necessary electronic components for assembly.
Detailed steps for a thorough pre-flight check.
Specific instructions for assembling the 500HH2 component.
Specific instructions for assembling the 500HH11 component.
Specific instructions for assembling the 500HZ2A component.
Specific instructions for assembling the 500HH2A component.
Key steps for assembling the main frame of the helicopter.
Instructions for installing specific servo models.
Instructions for installing the HS-82MG servo.
Specific instructions for assembling the 500HT4 component.
Specific instructions for assembling the 500HT5B/500HT2F components.
Specific instructions for assembling the 500HT2DB component.
Specific instructions for assembling the 500HZ6 component.
Specific instructions for assembling the 500HH11 component.
Specific instructions for assembling the 500HB1D component.
Specific instructions for assembling the 500HB2 component.
Specific instructions for assembling the 500HZ2 component.
Reference chart for linkage rods sizing and quantity.
Specific instructions for assembling the 500HH1A component.
Illustrates wiring for 6-channel and 7-channel receivers.
Recommended placement options for the ESC.
Steps for assembling the 500HC canopy.
Mapping of transmitter channels to servos for different brands.
Procedures for setting the tail rotor neutral position.
Pitch and throttle settings for general flight modes.
Details on the recommended battery for the helicopter.
Key features and benefits of the brushless speed controller.
Importance and method of simulation flight practice.
Practice for throttle, aileron, elevator, and rudder controls.
Procedures for safely starting and stopping the motor.
Instructions for adjusting the main rotor for balance.
How to use trim controls for flight adjustments.
Specific steps for rudder trim adjustment.
Common flight issues and their solutions.
Visual guide showing all parts in an exploded view.
Detailed list of parts with codes and specifications.
Summary of the helicopter's key features.
To Next Page