To Next PageTo Next PageHow to fix Alinco Receiver if it cannot turn the power on?
If your Alinco Receiver won't turn on, the battery may be dead. Try to recharge or exchange the batteries. Also, ensure the batteries are correctly positioned, paying attention to the '+' and '-' orientation. Poor contact between the battery case and transceiver terminals can also prevent the device from powering on; remove any dirt from the battery case.
What to do if there is no speaker audio on Alinco Receiver?
If you're not getting any sound from the speaker on your Alinco Receiver, first, check the volume level and adjust it if it's too low. Make sure there is no earphone connected to the device. It is also possible that the squelch is closed; adjust the squelch level or turn it off.
Why does my Alinco Receiver have an abnormal display or operation?
If the Alinco Receiver display is abnormal or the operation is not working correctly, the CPU might be malfunctioning. Turn the power off, and then on again. If the unit still doesn't recover, reset it. Also, make sure the batteries are not exhausted; recharge or exchange them if necessary.
Why does my Alinco Receiver have unclear sound?
If the sound from your Alinco Receiver is unclear, the frequency may be incorrect. Change the tuning step and adjust the frequency. Also, ensure that you've selected the appropriate modulation mode. A dead battery can also cause unclear sound, so recharge or exchange the batteries.
How to improve low sensitivity on Alinco Receiver?
If your Alinco Receiver has low sensitivity, the squelch level might be set too high. Adjust the squelch level or turn it off. Also, check if the attenuator is turned on and turn it off. Ensure that the antenna selection (WHIP, EAR, ABAR, SBAR) is correct; check the antenna type and switch accordingly.
What to do if I cannot set the frequency on my Alinco Receiver?
If you cannot set the frequency on your Alinco Receiver, it might be because the keylock is turned on. Turn the keylock off.
Why Alinco Receiver cannot scan?
If your Alinco Receiver cannot scan, the squelch might be opening. Set the squelch value to cut the noise off.
What to do if Alinco Receiver cannot execute Program scan?
To fix the 'cannot execute program scan' error on your Alinco Receiver, program the upper and lower limits properly.
Power| supply voltage | DC 3.6V - DC 6V |
|---|---|
| external input voltage | DC 4.5V - DC 16V |
| current consumption during reception | 75 mA |
Operating Environment| temperature range | –10 ~ +60°C |
|---|---|
| frequency stability | ±5 ppm |
| ground | Negative ground |
Weight and Dimensions| weight | 145 g |
|---|---|
| width | 56 mm |
| height | 102 mm |
| depth | 23 mm |
Detailed overview of the device's front and top panel components and controls.
Description of controls and connectors located on the side panel of the device.
Explanation of the device's keyboard layout, button functions, and input methods.
Overview of the device's screen layout, indicators, and displayed information.
Procedures for powering the device on/off, adjusting audio volume, and setting squelch levels.
Understanding and switching between VFO, Preset, and Memory modes, and setting frequencies.
Steps for programming, accessing, and erasing memory channels for frequency storage.
Utilizing VFO, Program, Preset, and Memory scan functions, plus tuning step adjustments.
Restoring scrambled audio transmissions and detecting clandestine listening devices.
Managing keylock, performing resets, and configuring device settings via Set Mode.
Adjusting antenna selection, modulation modes, and stereo/mono audio output.
Bank linking, scan modes, APO, battery save, priority watch, and beep functions.
Copying device settings and memories to another unit using a cloning cable.
Guide to resolving common problems, errors, and operational symptoms.
Detailed technical specifications and performance characteristics of the DJ-X3 receiver.
