●
Remove the remainder using a low-pressure water
spray.
1.
Be careful when spraying near scratched or torn
safety decals or near edges of decals as water
spray can peel decal off surface.
2.
Be careful when spraying near chipped or
scratched paint as water spray can lift paint.
3.
If a pressure washer is used, follow the advice
of the pressure washer manufacturer.
●
Inspect machine and replace worn or damaged
parts.
●
Sand down scratches and the edges of areas of
missing paint and coat with WainRoy spray paint of
matching color (purchase from your WainRoy
dealer).
●
Replace any safety decals that are missing or not
readable (supplied free by your WainRoy dealer).
See Safety Decals section for location drawing.
To Next Page
Loading...