DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(Dealer’s Responsibility)
Inspect the equipment thoroughly prior to delivery to
ensure it is set up properly before delivering it to the
customer.
The following check lists are a reminder of points to
inspect. Check off each item as it is found satisfactory
or after proper adjustment is made.
Check that all safety decals are installed and in
good condition. Replace if damaged.
Check all bolts to be sure they are properly
torqued.
Check that all cotter pins and safety pins are
properly installed. Replace if damaged.
Check and grease all lubrication points.
DELIVERY CHECK LIST
(Dealer’s Responsibility)
Show customer how to make adjustments.
Point out the safety decals. Explain their meaning
and the need to keep them in place and in good
condition. Emphasize the increased safety haz-
ards when instructions are not followed.
Instruct customer how to lubricate and explain
the importance of lubrication.
Present Operator’s Manual and request that cus-
tomer and all operators read it before operating
equipment. Point out the manual safety rules,
explain their meanings and emphasize the
increased safety hazards that exist when safety
rules are not followed.
To Next Page
Loading...