Need help?Do you have a question about the ALLEN & HEATH GL2400 Series and is the answer not in the manual?
General| Type | Analog Mixing Console |
|---|---|
| Stereo Inputs | 4 |
| Aux Sends | 6 |
| Groups | 4 |
| Mic Preamp EIN | -129dBu |
| Faders | 100mm |
| Number of Channels | 24, 32, 40 (depending on the model) |
| Mic/Line Inputs | 24, 32, 40 (depending on the model) |
| THD+N | <0.005% @ 1kHz |
| Power Supply | Internal |
| EQ | 4-band EQ with 2 swept mids |
| Phantom Power | +48V |
| Dimensions | Varies by model |
| Weight | Varies by model |
Details the terms and conditions for warranty claims on the product.
Essential safety warnings and precautions to be read before operating the console.
Specifies the wire colour coding for replacing the mains plug.
Instructions on free-standing operation and flight case considerations for console installation.
Details on proper grounding, switching the console on/off, and connecting backup power.
Guidance on managing ground loops, buzz, and interference in audio signals.
How the console can be configured for Front of House or Monitor mixing operations.
How to set the channel GAIN for optimal signal level and headroom.
Details on AUX 5-6, LR, and M master controls, including their functions in different modes.
Information on console monitoring, headphone output, and talkback microphone setup.
Explanation of gain structure, signal levels, headroom, and dynamic range for optimal performance.
How to use Pre-Fade Listen (PFL) and After-Fade Listen (AFL) for signal monitoring.
How the console's dual functionality adapts for FOH, monitor mixing, and recording applications.
Instructions for setting up aux-fed subwoofers and creating separate center/mono mixes.
Comprehensive list of all console connectors, their types, and electrical characteristics.
Instructions for removing the base and configuring internal jumper settings for various options.
Details on setting mono channel aux pre/post EQ, direct output pre/post fade.
Information on impedance balanced and optional electronically balanced outputs for aux and matrix.
To Next Page