GR1
USER GUIDE
7
CONTROL FUNCTION
STEREO
Adjusts the output
level of the main
L & R signals.
MONO
Adjusts the output
level of the mono
signal.
METERS
Used for signal
level checking.
L-R / MONO
Selects the
PHONES signal
source.
MONITOR LEVEL
Adjusts the PHONES
signal level .
ON
Indicates power to the
unit either AC mains or
external DC in.
master section
input section
SOURCE
The 3 way lever switch
selects either MIC,
AUX(OFF) or LINE inputs.
PEAK
The peak indicator
illuminates when the
channel signal approaches
overload.
PRIORITY
Selecting priority on a
channel reduces the signal
levels of the other
channels.
LEV & PAN
The top control adjusts the signal
level to the L, R, & M mix. The
lower control adjusts the position
in the stereo image. In the centre
click position, the L & R have
equal signal levels.
MONO
Selecting mono
combines the AUX
or LINE left & right
input signals.
LIMIT ACTIVE
Indicators illuminate when
compressor/limiters are active.
ALARM ACTIVE
Indicates the
alarm status of
the unit.
PHONES
For headphone monitoring
the main output signals.
To Next Page
Loading...
