Need help?Do you have a question about the ALLEN & HEATH Qu-16 and is the answer not in the manual?
General| Sample rate | 48 kHz |
|---|---|
| Channels quantity | 16 channels |
| Digital sound processing | - bit |
| Output impedance | 75 Ω |
| Built-in display | Yes |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (typical) | 82 W |
| XLR out | 12 |
| RJ-45 ports quantity | 1 |
| Headphone connectivity | 6.3 mm |
| Number of microphone inputs | 16 |
| DJ mixer | - |
| Product color | Black |
| USB connector type | USB Type-A, USB Type-B |
Weight and Dimensions| Depth | 500 mm |
|---|---|
| Width | 440 mm |
| Height | 186 mm |
| Weight | 10000 g |
| Package depth | 680 mm |
| Package width | 610 mm |
| Package height | 350 mm |
| Package weight | 13500 g |
Emphasizes reading supplied safety instructions for operator and performer safety.
Explains firmware's role and how to update it via USB.
Covers the mixer's input and output connections.
Explains how to connect remote audio devices using dSNAKE.
Provides a guide to the mixer's layout and operation.
Details functions controlled via the touch screen.
Explains setup options accessible through the touch screen.
Describes how to configure SoftKeys for various functions.
Details network settings for connectivity and remote control.
Explains MIDI implementation for control and DAW integration.
Explains how to reset mixer settings to factory defaults.
Describes the mixer's fader strips, layers, and motorized faders.
Resets mixer parameters to a known starting point for mixing.
To Next Page
