Need help?Do you have a question about the ALLEN & HEATH Qu-24 and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Channels | 24 |
| Faders | 25 |
| Mix Busses | 10 |
| FX Engines | 4 |
| USB Audio Interface | 32x32 |
| Touchscreen | Yes |
| Frequency Response | 20Hz to 20kHz (+0/-0.5dB) |
| Sampling Rate | 48kHz |
| EQ Bands | 4-band Parametric |
| Computer Connectivity | USB, Ethernet |
| USB | Yes |
| Word Clock | No |
| Dynamic Processing | Gate, Compressor, Limiter |
| Built-in WiFi | No |
| Power Supply | Internal |
| Inputs - Mic Preamps | 24 |
| Outputs - Main | 2 |
| Outputs - Aux | 10 |
| Headphones | 1/4-inch stereo |
| I/O Expansion Slots | dSnake |
Read and follow all safety instructions for safe operation and operator protection.
Avoid damage by following guidelines on handling, environment, and cleaning.
Describes the types and functions of local input connectors on the mixer's rear panel.
Details the types and functions of local output connectors on the mixer's rear panel.
Covers additional rear panel connections like Lamp, USB B, Network, and dSNAKE ports.
Explains how to safely power on and off the mixer, including boot-up sequence and notes.
How to connect AudioRacks via dSNAKE Cat5 cable for remote audio input/output.
Details the function and operation of fader strips, including layers and motorised faders.
How to name channels, FX, mixes, and groups using the screen keypad.
Explains available processing blocks like Preamp, Gate, PEQ, Compressor, and Delay for channels.
Covers storing and recalling processing settings using library functions.
Describes how to access and manage channel assignments and routing through the Touch Screen.
Explains how to use Groups for sub-mixing and processing, available on Qu-24/32.
Details the use of Matrix mixes for additional outputs, available on Qu-24/32.
Covers the functionality of Mute and DCA Groups for controlling multiple channels simultaneously.
Resets mixer to a factory default starting point for mixing.
Performs a full system reset, clearing all settings, scenes, libraries, and permissions.
To Next Page
