ALLEN & HEATH VZ3 12:2 - User Manual

USER GUIDE
Publication AP5331
MixWizard WZ
3
16:2 and WZ
3
12:2

ALLEN & HEATH VZ3 12:2 Specifications

General

Type	Analog Mixer
Channels	12
Buses	2
Faders	60mm
Phantom Power	Yes
EQ	3-band

Summary

Limited One Year Warranty

Important Safety Instructions

Installing the Console

Connecting Power

Grounding

Audio Connections

Dealing with Ground Loops, Buzz and Interference

The MONO Input Channel

GAIN

How to adjust the input sensitivity to match sources for optimal level.

EQ

Details on the 4-band semi-parametric equalizer controls.

AUX SENDS

How to adjust aux output levels and pre/post-fade settings.

MUTE & PFL

The STEREO Input Channel (WZ³12:2 only)

Stereo Inputs, Routing, and EQ

The STEREO Effects Processor

Single and Dual FX Modes

Using the processor as a single or dual effects unit with preset banks.

The Stereo Effects Return Channel

Return Level, Mute, and Mode Control

MIDI Control and Effects Editing

MIDI Channel and Preset Control

Editing Effects Parameters via PC

Using Allen & Heath FX Editor software for parameter editing via MIDI.

The Master Section

Aux Master Controls

Master level controls for each auxiliary mix output.

L-R and M Fader Masters

Controls for the main stereo mix (L-R) and mono sum (M) outputs.

Additional Outputs and Monitoring

AB OUTPUT Configuration

Setting up the additional stereo AB output for various monitoring or mix tasks.

Console Monitor and Stereo Return

Engineer monitoring options and the stereo return channel ST2/ST6.

Gain Structure

Using Meters and Setting Gain

How to use meters and set channel gain for optimal signal levels.

Matching Console to Destination Equipment

Ensuring proper level matching between the console and external gear.

Specifications

FX Parameters

FX Types Available

User Options and Configuration

Configuring Internal Jumpers

Mono Channel Configuration