EasyManua.ls Logo

ALLEN & HEATH Xone:32 - User Manual

ALLEN & HEATH Xone:32
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER GUIDE
Publication AP4264
P R O F E S S I O N A L D J M I X E R
Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Xone:32 and is the answer not in the manual?

ALLEN & HEATH Xone:32 Specifications

General IconGeneral
TypeDJ Mixer
Channels4
EffectsNo built-in effects
Inputs4 x Line, 2 x Phono
Outputs2 x Master, 1 x Booth, 1 x Record
EQ3-Band
Power SupplyExternal Power Supply
FilterYes (VCF)

Summary

Limited One Year Warranty

Conditions Of Warranty

Details the conditions for warranty claims, including proper installation and authorized repairs.

Important Safety Instructions

Read Instructions

Retain safety and operating instructions for reference and adhere to all warnings.

Do Not Open

Operate with panels fitted; disconnect mains for servicing by competent personnel.

Power Sources

Connect to specified mains power type and ensure a good ground connection.

Power Cord

Use appropriate cord, route away from damage, and do not tamper with grounding.

Grounding

Do not defeat grounding or polarization means, or remove ground connection.

Ventilation

Do not obstruct ventilation slots; ensure adequate airflow in rack units or flightcases.

Moisture

Do not expose to rain/moisture or use in damp conditions; avoid liquid spills into openings.

Heat

Avoid excessive heat/direct sunlight; locate away from heat-producing equipment.

Environment

Protect from dirt, dust, heat, vibration; avoid smoke, spillage, and ash.

Handling

Avoid heavy objects, scratching, rough handling; protect controls during transit.

Servicing

Switch off/unplug if exposed to moisture, spills, or damage; refer servicing to qualified personnel.

Installation

Install per guide; do not connect amplifier outputs directly; use connectors properly.

Mains Plug Wiring Instructions

Introduction

Key Features

Quick Start

Installation

Connecting Mains Power

Connect to correct mains lead, ensuring voltage and grounding for safe operation.

Earthing

Explains the importance of earth connections for safety and audio performance.

Cables and Connections

Operating Instructions

Overview of the Application

Illustrates a typical DJ application hook-up for the XONE:32 mixer.

Gain and Operating Levels

Using the Channel EQ

Using the Crossfader

Replacing the Crossfader

The TRANSMUTE Buttons

Using the VCF

Filter Type

Using the DRS User Presets

How to Store a Preset

Press and hold preset button for 2 seconds to store settings; indicator flashes to confirm.

How to Recall a Preset

Press preset button for <1 second to recall stored settings; indicator lights up.

How to Clear all Presets to Default

Hold LFO ON & x2 switches for 2 seconds during power-on to clear all presets.

Specifications

XONE:32 BLOCK DIAGRAM

Connector Types

Details XLR, TRS, and RCA connector pin assignments for inputs and outputs.

Input Connections

Lists input types, impedance, and sensitivity for MIC, LINE, and PHONO connections.

Output Connections

Lists output types, impedance, and level for MIX, BOOTH, AUX, RECORD, and HEADPHONES.

Glossary

Order Codes

Tips and Troubleshooting

Related product manuals