Need help?Do you have a question about the ALLEN & HEATH XONE:23C and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| EQ | 3-band EQ per channel |
| Weight | 3.5 kg |
| Inputs | 2 x Phono/Line |
| Outputs | 1 x stereo RCA |
| Filter | Yes |
| Crossfader | Replaceable |
Adjusts signal level for each input channel to prevent clipping and ensure optimal gain staging.
Allows for complete cutting or boosting of bass, mid, and treble frequencies for sound shaping.
Routes the channel signal to the VCF filter and the external FX send output.
Enables monitoring of individual channels before they are mixed into the main output.
Controls the volume level of each individual channel within the mix.
Sets the overall signal level sent to the main XLR mix and monitor outputs.
Manages headphone volume, cue/mix balance, and connection types.
Controls transitions between channels and adjusts crossfader response curves.
Professional input for microphone, including level adjustment and EQ.
Features for activating external effects loops and controlling filter type, frequency, and resonance.
Details on connecting audio sources, turntables, and external effects units.
Connects the main stereo mix, monitor feeds, and recording outputs.
Connections for power supply, computer interface, and turntable grounding.
Verifies correct installation and configures audio/MIDI settings on Mac.
Confirms MIDI device status and explains X:Link interface for controller integration.
Verifies correct driver installation via Windows Device Manager.
Describes how voltage-controlled filters alter frequency response and create tonal effects.
Explains the selection of high-pass and low-pass filter types.
Step-by-step guide for replacing the crossfader unit.
Details on modifying phono inputs for different gain or line-level operation.
Advice on using the computer for track replay and FX with the mixer.
Troubleshooting steps for when no audio signal is output from the mixer.
Steps to diagnose and resolve issues with external effects units not producing sound.
Guidance on adjusting input levels to prevent signal distortion and clipping.
Technical details of input and output connectors and their specifications.
Key performance metrics including distortion, noise, and fader shut-off.
Physical measurements and weight of the mixer.
To Next Page
