XK2 DSRN_ Issue 1 XK2_OFW250 11/21 Page 4 of 5
XONE:K2 OPERATING FIRMWARE v2.5.0
Xone Product XONE:K2
Operating Firmware V2.5.0
Operating System: Windows
®
PC [K2 Programmer.exe]
Installing XONE:K2 Operating Firmware continued…
Close all Audio and MIDI applications before
running the Updater.
Press OK to run the Updater app.
Press Yes to continue.
The current Device Firmware Version
is displayed.
If the Connected Device Firmware Version
displayed is V2.5.0
The XONE:K2 Operating Firmware is up to date
! You do not need to continue the Update.
Close the application.
REBOOT (disconnect / re-connect) the XONE:K2
before further use.
If the Connected Device Firmware Version
displayed is below V2.5.0
Click the Yes to continue the update.
Installation takes a moment, various messages are displayed during the process …
! IMPORTANT: DO NOT disconnect the XONE:K2 hardware during the update
After the new firmware is installed, REBOOT
the XONE:K2 (disconnect/re-connect) to complete
the update.
Click OK to exit the Updater.
The Operating Firmware is now up to date.
XONE:K2 is ready to connect and use with AMD Ryzen
and
Apple Silicone (M1) hardware.
To Next Page
Loading...
