Allen-Bradley 1794-OE12 - User Manual

Installation Instructions
FLEX I/O DC Input, Output, and
Input/Output Analog Modules
Catalog Numbers 1794-IE12, 1794-OE12, and 1794-IE8XOE4
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Prevent Electrostatic Discharge 3
North American Hazardous Location Approval 5
Install Your Analog Input/Output Module 6
Connect Wiring 6
Configuring Your Module 11
Data Table – 1794-IE12 11
Data Table – 1794-OE12 13
Data Table – 1794-IE8XOE4 14
Specifications 15

Allen-Bradley 1794-OE12 Specifications

General

Manufacturer	Allen-Bradley
Module Type	Analog Output
Number of Outputs	12
Product Type	I/O Module
Output Voltage	0 to 10V DC
Output Current per Channel	20 mA
Total Current	240 mA
Output Range	0 to 10V DC
Compatibility	Flex I/O
Operating Temperature	0–55 °C (32–131 °F)
Temperature Rating	0–55 °C (32–131 °F)

Summary

User Information and Safety Guidelines

Environment and Enclosure Requirements

Prevent Electrostatic Discharge (ESD)

Hazardous Location Approval

Analog Module Installation

Wiring Connections Guide

1794-IE12 Analog Input Wiring

1794-OE12 Analog Output Wiring

1794-IE8 XOE4 Analog Module Wiring

Module Configuration Settings

Range Selection and Configuration Bits

Safe State Output Configuration Bits

Configures safe state behavior for output modules based on selected bits.

Product Specifications Overview

Environmental Operating Specifications

Analog Output Module Specifications

Analog Input Module Specifications