Allen-Bradley 5069 CompactLogix Reference Manual

Equipment Phase Instructions
Chapter 7
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018 449
Number Description
When FactoryTalk Batch software has new parameters for an equipment phase, it sets
the NewInputParameters bit for the phase.
After downloading the parameters, use the PRNP instruction to clear the bit.
Available Languages
Ladder Diagram
Function Block
This instruction is not available in function block.
Structured Text
PRNP ( );
Operands
Ladder Diagram
None
Structured Text
None
Enter the parentheses ( ) after the instruction mnemonic, even though there are no
operands.
Affects Math Status Flags
No
Major/Minor Faults
None. See Index Through Arrays for operand-related faults.
Execution
Condition/State Action Taken
Prescan No action taken.
Postscan No action taken.
EnableIn is false No action taken.
EnableIn is true The instruction executes.

Allen-Bradley 5069 CompactLogix Specifications

General

Brand	Allen-Bradley
Model	5069 CompactLogix
Category	Controller
Language	English