Allen-Bradley 700-HX - Chapter 3 Functions; Settings for Advanced Functions

1 Publication 700-UM002A-EN-D - July 2001
Chapter
3
Functions
Settings for Advanced
Functions
ss hs
i1 ms ji20 ms j
iA-1 jiA-2 jiA-3 jib-1 jib jid jiE jiF jiZ jiA j
cc
s
‘
Run mode
Power ON
Note: 1. If the mode is switched to the function setting mode during operation,
operation will continue.
2. Changes made to settings in function setting mode are enabled for the
first time when the mode is changed to run mode. Also, when settings
are changed, the timer is reset (time initialized and output turned OFF).
For details on operations in run mode, refer to 3-9.
See note 1. See note 2.
3 s min. 3 s min.
Function setting mode
Timer mode
Output mode
Output time
Input signal
width
Key protect
level
Time range
Set the key protect level using the keys.
(If the output time is set to 0.00, is displayed.)
Displayed for modes A, A-1, A-2, A-3, B, and B-1 only.
0.01 s to 99.99 s
(default setting)
0.1 s to 999.9 s
1 s to 9,999 s
0 min 01 s to 99 min
0.1 min to 999.9 min
1 min to 9,999 min
0 h 01 min to 99 h 5
9
Display
0.1 h to 999.9 h
Set Value
1 h to 9,999 h
Time Range List
0.001s to 9.999 s
Set the time range using the keys.
Set the timer mode using the keys.
Set the output mode using the keys.
Set each digit for the output time using the corresponding keys.
Press the mode button for several seconds to display the Time Range setting
screen.