Need help?Do you have a question about the Allen-Bradley 700-HX and is the answer not in the manual?
General| Brand | Allen-Bradley |
|---|---|
| Model | 700-HX |
| Category | Timer |
| Language | English |
Details compliance with Council Directive 89/336/EC Electromagnetic Compatibility (EMC).
Details compliance with Council Directive 73/23/EEC Low Voltage safety requirements.
States the purpose of the manual to provide information for applying and troubleshooting the 700-HX timer.
Identifies qualified personnel responsible for setup and servicing of the devices.
Lists and explains the various timer output modes and designations used in the manual.
Provides reference to the Relays and Timers Selection Guide publication.
Lists the items included in the 700-HX Multifunction Digital Timer product package.
Details input voltage, output modes, timing ranges, sockets, and pins for the 700-HX.
8-pin sockets for 700-HX relays, panel or DIN rail mounting, guarded terminals.
8-pin sockets for 700-HX relays, panel or DIN rail mounting, open style.
Standard 35 x 7.5 mm DIN Rail, 1 meter long, sold in packs of 10.
8-pin backwired socket with solder terminals for 700-HX timing relays.
Frame adapter and protective cover for flush mounting and setting protection.
Pre-printed and blank identification tags for easy placement on relays.
Explains the functions of inputs (start signal, reset, gate) and outputs (control output).
Provides reference values for switching operations and product specifications.
Lists electrical ratings, mechanical specifications, display details, and timer parameters.
Identifies and describes the indicators, operation keys, switches, and display elements of the 700-HX.
Guides on setting time range, timer mode, output mode, and input signal width.
Explains Time Range, Timer Mode, Output Mode, Output Time, Input Signal Width, and Key Protect Level.
Describes how to set values and ON duty ratio in run mode for different output modes.
Explains present value, cycle time, and switching from timer to twin timer operation.
Provides timing diagrams for various output modes, illustrating signal and output behavior.
Shows the physical dimensions and mounting options for the 700-HX timer.
Provides panel cutout dimensions and side-by-side mounting calculations.
Shows terminal layout and internal schematics for start/reset inputs.
Details no-voltage inputs (NPN), input signal levels, and sensor connections.
Lists the electrical specifications for applicable two-wire sensors.
Details 8-pin screw terminal tube base sockets for 700-HX relays.
8-pin backwired specialty socket with solder terminals for 700-HX timing relays.
Frame adapter for mounting and protective cover for settings.
Important safety precautions regarding hazardous locations, product modification, and electrical hazards.
Details requirements for power supply, transformer isolation, and voltage fluctuations.
Advises on separating input lines from power lines to prevent noise malfunction.
Lists environmental conditions to avoid, such as water, oil, vibrations, dust, and direct sunlight.
Covers self-diagnostic functions and changing set values during operation.
Provides flowcharts for operating the timer and twin timer functions using the keys.
Provides tables for quick reference of timer and twin timer settings.
Details parameter settings for timer operation in run mode.
Details parameter settings for twin timer operation in run mode and function setting mode.
To Next Page