Allen-Bradley 700-HX - Specialty Socket; Mounting and Protection Accessories

Publication 700-UM002A-EN-D - July 2001
6-2 Accessories
Description
Specialty Socket
8-pin backwired socket with solder
terminals for use with Bulletin
700-HX timing relays. Order must
be for 10 sockets or multiples of
10.
Frame Adapter
For flush or door mounting of all Bulletin 700-HR and -HX timers.
Protective Cover
Helps prevent tampering of timing and mode settings. Provides a degree of protection against
water and dirt from entering the front of the relay. For use with all Bulletin 700-HRs and -HX
timing relays.
Pre-printed identification tags —
Contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings
CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing
for easy placement on relays.
Blank identification tags —
Contains 10 sheets of blank identification tags for customer specialized printing. Each sheet
contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays.
Cat. No. 700-HN108
(1-3/8)
35
(1-1/4)
32
Cat. No. 700-HN130
Cat. No. 700-HN132
Cat. No. 700-N41
Cat. No. 700-N40