Visit our website: www.ab.com/catalogs
Bulletin 900-CONV
Interface Converter
26
Bulletin 900-CONV Front Display/Operations/Bulletin 900 BuilderLite Product Selection
Bulletin 900-CONV Front Display / Operations
Caution: Make sure to use the Bulletin 900-CONV with the terminal cover mounted when using in machinery that must conform to EN/IEC
standards.
Product Selection
Description Cat. No.
900BuilderLite Personal Computer Configuration Software for Bulletin 900-TC8 and 900-TC16 Temperature/Process Controllers with
Enhanced Features
900-BLDLTSW1 ✶
✶ Software is available FREE. To download software, go to the Bulletin 900 website found at: www.ab.com/industrialcontrols/products/relays_timers_and
temp_controllers/single_loop_temp-heater_controllers/900tc.html.
Go to "Get Software" (upper right of screen) and click on "900BuilderLite" and follow the download instructions.
Minimum Computer Hardware Requirements
Computer Operating System Requirements
The following systems can be used with 900BuilderLite software.
Microsoft Windows 2000/XP/Vista
Table of Contents
Product Selection...... 26
y 300 MHz CPU
y 650 MB free disk space
y SVGA resolution monitor (XGA recommended)
y Microsoft Windows supported mouse
y Available serial 9-pin COM port (COM address 1 to 8) for connection to RS-232 option unit of 900-TC8 or RS-232 to RS-285 converter
(Bulletin -CONVxx) for network connection to 31 Bulletin 900-TC8 and/or 900-TC15 controllers
y Available USB port for a direct connection to the 3-pin serial port of a Bulletin 900-TC8 or 900-TC16 using the 900-CPOEM1 to serial
communication cable.
Bulletin 900 — 900BuilderLite™ (Version 1.29) is FREE
Personal Computer (PC) Configuration Software for Bulletin
900-TC8 and 900-TC16 Series B Temperature/Process
Controllers.
y Simplifies controller configuration
y Parameters can be saved as a .CSV format for use by Excel
9 Version 1.2 must be used with the Series B 900-TC8 and 900-TC16.
Version 1.1 must be used with Series A 900-TC8 and 900-TC16.
y Provides a tabular fill-in-the-blanks on-line configuration and
monitoring option to using the 900-TC8 or 900-TC16 controller’s
keypad and LED display
y Ability to save parameters to PC storage devices and retrieve as
required
y Configuration and monitoring can be done via direct or RS485
networked connection
To Next Page
Loading...
