Need help?Do you have a question about the Allen-Bradley 1305-BA04A and is the answer not in the manual?
General| Brand | Allen-Bradley |
|---|---|
| Model | 1305-BA04A |
| Category | Controller |
| Language | English |
General safety and operational guidelines applicable to the drive.
Steps to access the drive's terminal blocks for wiring connections.
Details on connecting AC input and motor power terminals.
Wiring practices for control signals and connections to the drive.
Overview of the Human Interface Module's components and functions.
Steps for accessing and navigating parameters for viewing or programming.
Outlines the steps for initial drive setup and configuration.
Steps for pre-power-up checks with the motor disconnected.
Configuring the drive's control input mode (e.g., 3-wire).
Procedure to verify the motor's direction of rotation.
Parameters for basic drive operation and configuration.
Parameters for advanced functions like custom Volts/Hz and braking.
Parameters for setting frequency sources, accel/decel, and skip frequencies.
Parameters for viewing drive fault information and programmed settings.
Explains how faults are displayed and indicated on the drive.
Procedures for clearing a fault condition from the drive.
A schematic showing the drive's internal components and connections.
Essential steps for achieving CE compliance in the installation.
Diagrams and guidelines for the CE-compliant electrical setup.
Specific grounding requirements for CE compliance, especially with RFI filters.
To Next Page