Allen-Bradley 1305-BA04A - Accel Owner; Decel Owner; Fault Owner; Reference Owner

Programming
5-52
Owners Group (continued)
[Reference Owner]
Parameter # 106
[Reference
Owner]
Parameter Type Read Only
This parameter displays which adapter has exclusive
control of selecting the [Freq Source].
Units Byte Settings 1
0
Controlling
Not Controlling
[Accel Owner]
Parameter # 107
[Accel
Owner]
Parameter Type Read Only
This parameter displays which adapter currently is
exclusively controlling the selection between
[Accel Time 1] and [Accel Time 2].
Units Byte Settings 1
0
Controlling
Not Controlling
[Decel Owner]
Parameter # 108
[Decel
Owner]
Parameter Type Read Only
This parameter displays which adapter currently is
exclusively controlling the selection between
[Decel Time 1] and [Decel Time 2].
Units Byte Settings 1
0
Controlling
Not Controlling
[Fault Owner]
Parameter # 109
[Fault
Owner]
Parameter Type Read Only
This parameter displays which adapters are currently
issuing a [Clear Faults] Command. Multiple adapters can
issue simultaneous [Clear Faults] Commands.
Units Byte Settings 1
0
Controlling
Not Controlling
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive