Allen-Bradley PanelView C400

Installation Instructions
PanelView Component HMI Terminals
Catalog Numbers 2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M,
2711C-T6M, 2711C-T4T, 2711C-T6C, 2711C-T6T, 2711C-T10C
About This Publication
This document provides instructions on how to install, wire, ground, and troubleshoot PanelView
Component HMI terminals. It does not provide information on how to configure or run applications on the
following devices:
2711C-F2M, 2711C-K2M, 2711C-T3M, 2711C-K3M, 2711C-T6M, 2711C-T4T, 2711C-T6C,
2711C-T6T, 2711C-T10C
Topic Page
Environment and Enclosure 3
Catalog Number Explanation 6
About the Terminals 6
Install the Terminal 9
USB Ports 20
Choose a Power Supply 21
Remove the Power Terminal Block 22
Connect Power 23
Ground the Terminal 25
Connect Devices 25
Troubleshooting 26
Battery Replacement 27
Specifications 30
Additional Resources 33

Allen-Bradley PanelView C400 Specifications

General

Brand	Allen-Bradley
Model	PanelView C400
Category	Touch terminals
Language	English

Summary

Important User Information

Safety Hazard Indicators

Explains symbols for Warning, Attention, Shock Hazard, Burn Hazard, and Important notes.

Environment and Enclosure

Environmental and Enclosure Requirements

North American Hazardous Location Approval

Explosion Hazard and Substitution Warnings

Prevent Electrostatic Discharge (ESD)

ESD Handling and General Precautions

Install the Terminal

Terminal Installation Spacing and Mounting

Panel Cutout Dimensions

Mounting Terminals in a Panel

Panel Mounting and Safety Procedures

Step-by-step guide for mounting terminals, including safety and hazardous location considerations.

USB Ports

USB Port Usage and Safety

Choose a Power Supply

Power Supply Requirements and Safety

Details on selecting the correct power supply and warnings about power connection hazards.

Remove the Power Terminal Block

Power Terminal Block Removal and Safety

Connect Power

Power Connection Procedures and Precautions

Steps for connecting power, including voltage ratings and crucial grounding warnings.

Wire Specifications and Connections

Input Power Terminal Wire Specifications

Ground the Terminal

Functional Earth Ground Connection

Mandatory grounding requirements for noise immunity, reliability, and EMC compliance.

Connect Devices

RS-422 RS-485 Port

RS-422 RS-485 Connector Pinout and Function

Troubleshooting

Check for Adequate Power Issues

Interpret LED Indicators at Startup

Startup LED Indicator States and Actions

Battery Replacement

Battery Replacement Safety and Warnings

Critical safety precautions and warnings for replacing the real-time clock battery.

Specifications

Certifications