Allen-Bradley PowerFlex 20-750-S1 User Manual

Rockwell Automation Publication 750-IN001O-EN-P - October 2014 45
Lift and Mount the Drive Chapter 3
3. Attach lifting hardware to the drive assembly.
Follow lifting instructions and precautions beginning on page 35
.
4. Locate the factory-assembled drive cabinets and cabinet options bay in its
final position.
5. Remove and discard the seven M8 sealing screws from the right side of the
cabinet options bay.
M8
13 mm
IP54, NEMA 12 Enclosure Rating Shown

Allen-Bradley PowerFlex 20-750-S1 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 20-750-S1
Category	Controller
Language	English