Allen-Bradley PowerFlex 20-HIM-A6

Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013 59
Using the HIM Chapter 4
Disabling Password Protection
1. Access the Status screen (see Figure 6).
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or key to scroll to Port 00.
3. Press the key to display its last-viewed folder.
4. Use the or key to scroll to the PROPERTIES folder.
5. Use the or key to select Log In.
6. Press the (Enter) key to display the Enter Password pop-up box.
7. Use the numeric keys to enter the existing password value.
Use the  soft key to delete an erroneous entry.
8. Press the ENTER soft key to enter the existing password.
9. Use the or key to select Change Password.
10. Press the (Enter) key to display the Enter New Password pop-up box.
11. Use the numeric keys and the  soft key to enter ‘0’, the default value to
disable the password protection feature.
12. Press the ENTER soft key to enter the ‘0’ (disable) default value.
13. After the password protection verification pop-up box appears, confirm
the new password by re-entering ‘0’.
14. Press the ENTER soft key to disable password protection.
(6&

(17(5
6WRSSHG
+]
$872
)
(QWHU3DVVZRUG
0
  
(6&

(17(5
6WRSSHG
+]
$872
)
(QWHU1HZ3DVVZRUG
0
  