Allen-Bradley PowerFlex 700AFE Installation Instructions

88 Rockwell Automation Publication 750-IN100B-EN-P - July 2017
Chapter 4 Mechanical and Electrical Installation
2. Apply the gasket in one continuous strip around the mating surface of
the enclosure. Seam the gasket at the approximate middle of the bottom
of the enclosure.
3. Align the right enclosure assembly (section 2 of n) with the input bay
assembly (section 1 of n) and bring together with the placed input bay.
4. Bring the aligned enclosures together.
Seam Location

Allen-Bradley PowerFlex 700AFE Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 700AFE
Category	Controller
Language	English