Allen-Bradley PowerFlex 700H - Component Test Procedures; Diagnostic LED Indicators

Rockwell Automation Publication PFLEX-IN015A-EN-P - March 2005 17
PowerFlex 700S and 700H Fan Inverter Upgrade Kit (Frame 9)
Step 10: Assembling New
Connector Plate
a
Task Description
Mount the connectors and bus bars on the new connector plate.
Proper tightening torque for reassembly is 3 N•m (27 lb•in).
Connect the AC conditioning circuit to the terminals for incoming three-phase power.
A
B
A
B
Components from AC
input drive shown.
=