Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 185
Configure the Stratix 5100 WAP Using the Command-Line Interface Chapter 5
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1/1
no ip address
no ip route-cache
!
ssid no_security_ssid
!
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0
48.0 54.0
rts threshold 2312
station-role root
!
interface Dot11Radio1/1.10
encapsulation dot1Q 10 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
For the instructions in Device Manager, see Configuring Security on page 64.
By selecting No Security, all the other settings in this CLI example are just the
defaults set by Device Manager
To Next Page
Loading...