Allen-Bradley Stratix 5100 - Example 4: WPA

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 191
Configure the Stratix 5100 WAP Using the Command-Line Interface Chapter 5
Example 4: WPA
This example shows part of the configuration that results from using the Security
page to create an SSID called
wpa_ssid, excluding the SSID from the beacon,
and assigning the SSID to VLAN 40:
ssid wpa_ssid
vlan 40
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
!
aaa new-model
!
!
aaa group server radius rad_eap
server 10.91.104.92 auth-port 1645 acct-port 1646
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop
group rad_acct
aaa session-id common
!
!