Allen-Bradley Stratix 5100 - Non-Root Bridge with Vlans

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 315
Configuring Spanning Tree Protocol Chapter 9
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
!
interface BVI1
ip address 1.4.64.23 255.255.0.0
no ip route-cache
!
ip default-gateway 1.4.0.1
bridge 1 protocol ieee
bridge 1 route ip
bridge 1 priority 9000
bridge 2 protocol ieee
bridge 2 priority 10000
bridge 3 protocol ieee
bridge 3 priority 3100
!
line con 0
exec-timeout 0 0
line vty 5 15
!
end
Non-root Bridge with VLANs
This example shows the configuration of a non-root bridge with VLANs
configured with STP enabled:
hostname client-bridge-remote
!
ip subnet-zero
!
ip ssh time-out 120
ip ssh authentication-retries 3
!
bridge irb
!