Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 367
Configuring Authentication Types Chapter 12
Use the timeout option to configure a timeout value for MAC addresses
in the cache. Enter a value from 30…65555 seconds. The default value is
1800 (30 minutes). When you enter a timeout value, MAC-authentication
caching is enabled automatically.
3. Return to privileged EXEC mode.
exit
4. Show entries in the MAC-authentication cache. Include client MAC
addresses to show entries for specific clients.
show dot11 aaa mac-authen filter-cache [address]
5. Clear all entries in the cache. Include client MAC addresses to clear
specific clients from the cache.
clear dot11 aaa mac-authen filter-cache [address]
6. Return to privileged EXEC mode.
end
7. (Optional) Save your entries in the configuration file.
copy running-config startup-config
This example shows how to enable MAC authentication caching with a one-hour
timeout:
ap# configure terminal
ap(config)# dot11 aaa mac-authen filter-cache
timeout 3600
ap(config)# end
Use the no form of the dot11 aaa mac-authen filter-cache
command to disable MAC authentication caching. For example:
no dot11 aaa authentication mac-authen filter-cache
or
no wlccp wds aaa authentication mac-authen filter-
cache
To Next Page
Loading...